Lighting - All Products

Klarus HM3 Super Lightweight 670 Lumens Multifunction Headlamp | Black

The Klarus HM3 Super Lightweight 670 Lumens Headlamp is an ultra-light, versatile light source for all your outdoor adventures. Weighing just 27g, it's designed for maximum comfort and freedom, allowing you to wear it for hours without fatigue. With a powerful 670-lumen beam and four modes, it's perfect for hiking, camping, or emergency situations. The innovative clip design allows you to adjust the beam from 0° to 180°, while the one-button control makes operation simple and intuitive. The headlamp is IPX5 waterproof, ensuring it performs in any weather. Plus, with a 5-hour runtime on low mode, it's built to last through your epic outdoor activities.

Features for Klarus HM3 Super Lightweight 670 Lumens Headlamp:

• As Light as 27g: Even more lightweight than you can believe, the HM3 shocks the crowd with its nearly non-existent weight. Wear it as long as you'd like without any fatigue while freeing up both of your hands. 
• 670 Lumen Beam a Shining jewel in the darkness: With a max output upto 670 Lumens, and 4 modes for hiking, camping, mountaineering and all wilderness adventures 
• Red Flashing Mode from Danger to Safety: Double Click to enter red flashing mode for signaling during any emergency in the outdoors 
• Innovative Clip Design Goes Beyond Just a "Headlamp": 0 - 180 degree angle full adjustment for headlamp mode, visor mode, backpack mode and anywhere a light is needed. 
• One Button to Control Them All: Moving away from complicated UI schemes the HM3 incorporates its interface into 1 button for intuitive control. 
• Single click for mode adjustment
• Double click to enter Red Flashing Signal
• Press and Hold to enter Turbo
• 5 Hours Runtime for All of Your Epic Adventures: Runtime of up to 5 hours under low mode gives the comfort and safety of light at anytime its needed 
• IPX5 Waterproof Rating for All Inclement Weather: IPX5 Waterproof rating and 1 meter drop resistance keep the light working under any condition in wilderness. 
• Clip Design: Rugged Stainless Steel Construction
• Absorbent Headband: Adjustable for Comfort in Use
• Silicone Button: Quick Response for the Best Experience

Specifications for Klarus HM3 Super Lightweight 670 Lumens Headlamp:

• LED Type: 6500-7500k
• Working Voltage: 2.8-4.2V
• Charging Current: 5V / 0.5A
• Max Output: 670lm (lumen)
• Dimension: 41.4mm x 34.8mm x 32.4mm
• Battery Capacity: 200mAh
• Waterproof Rating: IPX
• Weight: 27.3g (Excluding headlight zone)
• Colour: Black

From Backyard Parties to Camping Trips and More! No matter the occasion, the Klarus CL3 was built for convenience. Utilizing a color temperature range between 4000K and 1300K, the CL3's 4 brightness modes offer multi-use capabilities for use whether in the backyard or camping off the grid. This light outputs a max of 280 lumens, ensuring your entire group has more than enough brightness for nighttime activities. Special Pulse Mode activation outputs a 1300K orange color temperature with light cycling that naturally relaxes your body and mind, equipped with a 20-minute auto-shutoff to boot.

Mount and carry the CL3 via the magnetic top, metal hook, and even a 1/4-inch threaded hole for placing on a tripod. With three unique ways to mount, the CL3 has an exceptional user-friendly design that fully supports your outdoor adventure or backyard bash. Coupled with a push button side switch, this light is easy to operate.

The CL3 is built with an internal 2,600mAh 18650 battery pack which can be easily recharged via an in-body USB-C port. This battery pack supports runtimes of up to 13 hours on its lowest setting, so your lantern light can always uphold ambient illumination.

Specifications & Features:

• Modes: Four settings – 1300K orange light (50 lumens, 13 hours), 2700K warm light (110 lumens, 10 hours), 4000K white light (280 lumens, 5 hours), and 1300K pulse mode
• Produces 3 colour temperatures, and 4 brightness settings, catering to diverse lighting needs.
• Type-C rechargeable
• Low power consumption, ensuring long-lasting performance.
• IPX5 Waterproof and shockproof
• Carabiner-style hook attachment for hanging
• Magnetic top to attach to metal surfaces
• Easy operation with one push button
• Pulse mode design for sleep assistance and relaxation, coupled with a 20-minute auto-shutoff
• LED: 6x 5730 LEDs and 12x 2835 LEDs
• Performance: Max 280 lumens, illuminates up to 153.94 sqm
• Charging: USB Type-C charging (4.2 hours)
• Battery Life: Equipped with a 18650 battery (3.7V 2600mAh)
• Lightweight: weighs only 201.5g
• Size: 83.9mm x 161.1mm

The perfect companion for your Night Saber rifle mounted Strike torch. This allows you full control right where you want it. The coiled cord stretches from 31cm up to 60cm. The waterproof rubberized switch has multiple buttons for ease of reach. The buttons will turn the unit ON/OFF or 2 fast clicks for strobe. 

Simply unscrew the end cap from your Night Saber Strike torch and replace it with the remote switch upgrade. 

The Outdoor Outfitters Torch Scope Mount for LED Lenser and Coast Torches

After getting frustrated with the lack of mounting options for the most popular LED Torches we have come up with a fantastic easy to use mount. The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included Quick-Detach scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring. These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 30mm in diameter. But also works on the 1” body of the Olight torch in reverse with the 1” adapter on the mount side and the 30mm ring mounted to a 30mm scope.

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit Fits M7, M7R, M7RX, MT7, P7, P7.2, P7QC, T7, T7.2, T7M, X7R, Coast HP7. or any 30mm Torch Body
• Allen Keys to fit.

A remote switch is an add-on you won't regret having for a firearm mounted light. Have the switch where you want it, not where it has to be! 

The Olight SROD remote switch has two options, a high power button and a low power button for your choice of Illumination with one easy press. The switch magnetizes to the back of the torch as well as having a push-to-lock mechanism. Both of these systems securely attach the remote to your torch without the need for screws or other permanent options. It is also just as easy to detach from the torch! 

SROD Long Coil Wire Magnetic Remote Switch suitable for Javelot Pro 2, Warrior X 3 and Warrior 3

The perfect companion for your Night Saber rifle mounted Blitzer torch. This allows you to have full control right where you want it. The coiled cord stretches from 31cm up to 60cm. The waterproof rubberized switch has multiple buttons for ease of reach. The buttons will turn the unit ON/OFF, or 2 fast clicks for strobe. 

Simply unscrew the end cap from your Night Saber Blitzer torch and replace it with the remote switch upgrade. 

The Olight D58 G is a red filter designed for use with the Olight Warrior X Turbo. This filter features a colored lens and rubberized fitting that fits securely over the head of the Warrior X Turbo. Red light filters are great for improving night vision for hunting, travel or tactics.

The Klarus HM2 is specially designed to combine unique functionality and comfortable use. With motion-sensor technology, use the headlamp hands-free by pressing and holding any switch for 2 seconds. When motion sensor controls are activated, wave your hand to change brightness settings so you never have to stop running or working late. The light's 60-degree adjustment gives you ideal visual range so you always know where you're going.

Motion-sensor controls offer hands-free use for active mobility
Spotlight, area, and red light modes available for multi-use functionality
Runs on AAA Batteries, easy to keep in bulk for a longer runtime
Fantastic for camping or hiking use

The HM2's White LED output offers 270 lumens of brightness for late-night hiking ventures. The Red LED output improves peripheral vision and is produces light that reduces eye strain. Spot and area light modes allow for side lamp and SOS functionality, giving you optimal light output for a safer camping experience.

This headlamp runs on 3 x AAA alkaline batteries, which are easy to find and store. Never run out of light when plenty of AAA batteries are available to support your Klarus HM2. With the max 21 hours of extended runtime, your surroundings stay lit up for a long time.

LED CREE XP-G3
Max Throw 265.75ft / 81m
Peak Intensity 1,627cd
IP Rating IPX4
Drop Resistance 3.28ft / 1m
Switch Motion Sensor
Material Polymer

BRIGHTNESS
270 lumens (high)
100 lumens (low)

RUNTIME
5.5 hours (high)
16 hours (low)
13 hours (strobe *270 lumens)

BEAM DISTANCE
81 meters (high)
41 meters (low)

2.5m vehicle battery extension cord from Night Saber features a male accessory plug on one end and a female on the other end.

Specifications:
• Extension cord with mail accessory plug at one end; female accessory adaptor at the other
• Works with any item that plugs into a standard vehicle accessory socket
• 2.5 metres long

The Olight 21700 is a powerful Li-ion battery designed for use in the Olight flashlights such as the Warrior X. This battery can bring out the full power of your torch, keeping it charged up for extended periods of time. Li-ion chemistry is strong, stable and charges quickly

Specifications:

• Battery Size: 21700
• Battery Chemistry: Li-Ion (INR)
• Nominal Voltage: 3.6V
• Nominal Capacity: 5000mAh

Night Saber 18650 Rechargeable Li-ION Battery

Specifications:
3.6V
8650
3400 MAH
Quantity: x1

Please be aware that these are specifically designed for our spotlight models. Please check the compatibility for other items.

Charge your batteries on the go! 

With the Night Saber G4 Battery Charger, you can charge your batteries anywhere you can plug in to a powered USB port! USB cable included. 

The Night Saber G4 Battery Charger works with 3.7V rechargeable Li-ion and Li-polymer batteries: 18650, 26650, 32650, 18500, 18350, 17670, 16340.

Features:

• Keep your rechargeable batteries fully charged on the go
• Charge at home (USB adapter required), from any USB power bank, or in your car (USB adapter required)
• Charge two batteries at 1A once or four batteries at 500mA each
• Battery light indicator
• DC input: 5V/2A MicroUSB
• DC output: 4.2V/0.5A x4 (1.0A x2)

Turn your flashlight into a spotlight with this solid and comfortable grip from Night Saber! This pistol grip mount fit straight onto any torch or flashlight with a 1" or 30mm tube. Having a vertical grip allows for better comfort and control for the user.

As a bonus, the grip and ring can separate into a stand alone weaver rail foregrip to put on your rifle underside rail and a scope mounted weaver rail ring so you can mount a torch or red dot optic directly over your scope. 

New from Night Saber is this awesome little accessory every hunter/shooter needs for their set up, the Night Saber Universal Torch Mount.

Made from ultra-durable glass-fibre reinforced plastic, the Night Saber Universal Torch Mount adjusts at both ends to fit a variety of torches to almost any tube from 25mm to 34mm.

Not only is this the perfect torch mount versatile for any set up, it is super simple and easy to install and use. The Night Saber Universal Torch Mount allows you to easily remove your accessory when you don't need it.

Features and Specifications:
• Quick and easy set up
• No tools required
• Fits any tube from 25mm to 34mm
• Lightweight and strong
• Made from durable material
• 75mm between centers to fit over large-objective scopes

Night Saber power cord for Night Saber 6500 lumen rechargeable & 8000 Lumen Rechargeable Spotlights. Allows for constant use when hooked up to a cigarette insert. Good backup for when your battery runs out.

• Power source: Cigarette lighter
• Cord Length (compressed): 750mm
• Cord Length (stretched): >+1500 mm 

Control your Olight Warrior X Turbo flashlight without having to move your hand with this ROD-7 Remote Pressure Switch. This switch can be used as a replacement or spare for the one that comes with the Odin and is also compatible with the Warrior X Turbo. It attaches magnetically to the tail of the light, with no need to remove the tailcap switch, and locks in position. The actual switch rests in a flexible bracket that snaps into place on a Picatinny rail in a position that's convenient for you to reach.

Charge your batteries on the go! 

With the Night Saber G2 Battery Charger, you can charge your batteries anywhere you can plug in to a powered USB port! USB cable included. 

The Night Saber G2 Battery Charger works with 3.7V rechargeable Li-ion and Li-polymer batteries: 18650, 26650, 32650, 18500, 18350, 17670, 16340.

Features:

• Keep your rechargeable batteries fully charged on the go
• Charge at home (USB adapter required), from any USB power bank, or in your car (USB adapter required)
• Charge two batteries at 1A once
• Battery light indicator
• DC input: 5V/2A MicroUSB
• DC output: 4.2V/1.0A x2

Night Saber battery terminal adaptor with cigarette lighter to spade fitting.

Spare Night Saber wall charger for the Night Saber Hand-Held 120mm 65w LED 6500 lumen spotlight.

Specifications:

• For use with the Night Saber 120mm 65 watt rechargeable handheld LED spotlight
• Input: AC 100-240V; 50/60Hz 0.3A
• Output: 12.6V; 1000mA

Red spotlight filters from Night Saber - Choose your size in millimeter according to the diameter of your spotlight lens/head.

Easy clip on installation to your spotlight. A red filter is a very useful accessory that we believe every hunter should carry to be one step ahead of your game.

As a predator light, nothing really beats a red light. Most animals we hunt have dichromatic vision. Their eyes have two cones and see in two colours (predominantly blue and yellowish/pale green). Light towards the red end of the spectrum is naturally far less visible to them. This allows you to search with your red light beam with minimal risk of detection. If the animal doesn’t know you are there, you have more time to line up a shot.

Sizing compatibility with product SKU (can be searched directly on our website)

• 120mm Fits SKU/s 171075 & 171077
• 96mm Fits SKU 171053
• 125mm Fits SKU/s 171058, 171094, 171083, 171082
• 150mm Fits SKU/s 171085 & 171056
• 6500lm Model Fits SKU 171099

Charge your light on the go with this compact charging cable.  Delivers up to 2 Amps.

The MCC3 is compatible with the BATON PRO / S1R / S1R II / S10R III / S2R / S2R II / S3OR III / SEEKER 2 / SEEKER 2 PRO / H2R / H2R PRO M2R / M2R PRO / WARRIOR X / WARRIOR X PRO / PL-PRO

Specifications:
• Max Input: 10 W (5V, 2A)
• Max output: 4.2V