Outdoor Outfitters

The Clip On Decoy Motor is a powerful propeller that allows you to convert your floatation decoys to a swimmer. The swimming decoys provide a calm and non-dangerous feeling for wary birds flying above. This life like setting will attract more birds to land within a few feet from the spread.

Features:

• The slim body torpedo style

• A 3000 rpm motor

• Run-time: Approx 7hrs (tested underwater with 1.5v battery)

• Integrated weed-guard

• Easy to install clip

• Uses 1 "C" size battery (last longer than a "AA")

The claw-style clip let you clip it under various type of duck or goose decoys. It is strong enough to push a life-size to oversize decoy.

Easy and inexpensive way to add motion to your decoy spread.

Uses 1 "C" size battery (not included).

*Decoy not included*

Perfect for hunters of all sizes looking for a little more room in the blind. Built for serious waterfowler’s, Packed full of features every waterfowler’s will appreciate. Its low-profile design only 500mm high casts less of a shadow, and the padded backrest and extra-large footprint make it comfortable to sit in, the adjustable seat features a movable, ergonomic back-support cushion and improved headrest especially for taller and bigger hunters. The 600-denier polyester Camo shell has a weather-resistant PVC backing. It offers Camo-mesh view screen, Mesh face screen has an adjustable wire edge, and the mesh viewing screens are supported so they stay off your face when the blind is closed.  A 1,200-denier ballistic-weave, PVC-coated floor with reinforced corners; and a no glare, black-finished powered coated frame. Weighing in at only 8.9kg, this blind is easy to carry with a corrosion-resistant powder coated frame and drag handle. This light frame has button pins, which make for a quick and easy setup. There are zippers on the extended flagging ports, and a full, zipped foot pouch for convenience, there are large-sized mesh shell pouches.

Features:
- Perfect for the hunter looking for more room in the blind
- Low-profile design – built strong
- Durable, Powder coated frame
- Vegetation loops for camouflaging into your hunting back ground
- Zippered foot pouch
- 2 Side zippered flagging slots
- Reinforced fabric hinge
- Padded back support
- Adjustable hammock seat
- Gun rest
- Mesh shell pockets
- Pin less frame design
- Flag sheath located in door for storing your flags
- Stay dry Floor
- Adjustable back support
- Fully zippered foot pouch
- Weight 8.9kg

Size when set up ready to hunt:
2200mm long x 750mm wide x 500mm high

Size folded up ready to carry to your hunting ground:
1150mm long x 4 50mm wide x 180mm high

The Outdoor Outfitters 3D Leafy Camo Suit is a super light, comfortable and silent three dimensional 2 piece camouflage suit. This ghillie suit consists of a lightweight polyester mesh shell which is covered with over a thousand leaves designed to break up your outline and form. These leaves give this ghillie suit amazing depth allowing you to blend into your environment.

• 2 Piece trousers and shirt - fast to put on
• Packs easily into the provided mesh bag.

The Outdoor Outfitters 3D Leafy Camo Suit is a super light, comfortable and silent three dimensional 2 piece camouflage suit. This ghillie suit consists of a lightweight polyester mesh shell which is covered with over a thousand leaves designed to break up your outline and form. These leaves give this ghillie suit amazing depth allowing you to blend into your environment.

• 2 Piece trousers and shirt - fast to put on
• Packs easily into the provided mesh bag.

(150582)​​​​​​

Specifically designed to protect gun during storage or travel. Constructed of 100% soft cotton treated with silicone to help guard against rust, dirt, and scratches. Fits most rifles (with or without scopes) and shotguns.

Features:
• Protects gun during storage or when travelling.
• 100% cotton that has been specially treated with silicone so not to retain moisture.
• Protects against rust, dirt, and scratches.
• Draw string closure.
• 132cm/52" in length.
• Fits a wide range of firearms, with or without scopes.
• Colour: Grey.

Throws clays high, low, curved or skimming without the hassle of a machine!

This one piece plastic thrower, throws clays faster and farther than most mechanical throwers, and will not rust or break.

It makes for a smooth thrown bird. With a little practice you will soon be throwing jump birds, curves, and ground skimmers. Throws right and left handed. Total length 48cm.

Features:
•Throws clays faster and further than many mechanical traps
•Power curve design makes for smooth flight paths
•Right or left hand throwing
•Plastic construction will not rust or break

With its massive 16-litre capacity and lockable lid, this heavy-duty storage box is the perfect storage solution for tools, ammunition, any other items you need to store securely. Its heavy-duty construction means that the contents inside will remain safe and dry even if buried and sturdy carry handle allows for ease of transport. 

Features:
• Heavy-duty construction
• Great for tools, ammunition, and any other items you need to store securely
• Contents inside will remain safe and dry even if buried
• Carry handle
• Lockable (padlock sold separately).

Specifications:
• Capacity: 16 litre
• Dimensions: 30.5cm (W) x 15.4cm (D) x 34cm (H)
• Weight: 3.7kg.

The perfect companion for the storage of any Shotgun, handgun or rifle ammunition and much more. The lids have a rubber seal allowing for an airtight inside keeping anything inside dry and safe. With the fixed Hasp these ammo tins are easily lockable with padlock or cable lock (*not included).

Commonly referred to as the 50 calibre tin but used for grenades, 556 MM Blanks etc.

Features

• Holds up to 100x 50cal cartridges.
• Lid clamps on tightly with thick Rubber gasket
• Great for tools, ammo and other heavy items.
• Waterproof & Secure; Items inside remain safe and dry even when tin is buried.
• Fixed Hasp installed for lockable storage
• Collapsible Carry handle on top
• Stackable

Specifications:

• Volume: 9L
• Length 305 mm
• Width:155 mm
• Height 190 mm
• Weight: 2.66 Kg

MTM Flip-Top Ammo Boxes are a great way to protect ammunition from moisture and dust. They feature a textured surface and stackable design. The included label is idea for recording custom load data.

Sizing accommodates below cartridges:

260 Rem., 6.5-08 A-Square, 257 / 270 / 300 / 338-378 / 340 / 375 / 7mm Wby. Mag., 264 / 300 / 330 / 338 / 458 Win. Mag., 300 / 375 H&H Mag., 300 / 338 / 375 / 7mm / Rem. Ultra Mag., 30 Super Flanged, 300 / 330 / 375 / 416 Dakota, 303 Brit., 308 / 358 Norma Mag., 358 STA, 25-284 / 38-72 / 405 Win., 400 / 400-350 Nitro Exp, 400-360 Thin Rim Purdey, 404 Jeffery, 40-65 Sharps Str., 444 Marlin, 375 Ruger, 6.5-284 Norma, 6.53 Scramjet, 6.5x52 Ital., 6.5x57 Rimmed, 7.21 Firebird, 7mm Rigby, 7x61 S&H, 416 / 6.5 / 7mm / 8mm Rem. Mag., 416 Taylor, 458 Lott, 6.17 Spitfire, 7mm STW, 7.5x 54 Swiss, 7.62x54R, 8x64 Brenneke, 8x65 Rimmed, 8x68S Mag., 9.3x74 9.3x82 Rimmed, 9.5x57, 10.75x68 Mauser.

Bullet Down: 280 Flanged Nitro Express, 378 Wby. Mag., 338 Lapua Mag., 416 Rigby, 500 Nitro, 6.5 x 58 Rimmed, 7.82 Warbird, 8.59 Titan.

It is extremely well made and the materials used to manufacture it are of excellent quality. I think any dog, especially a gun dog, would be very happy to seen in the fine camouflage pattern.

The vest with a fitter carry handle along the back is very easy to fit. Merely put the dog’s head and front legs through the holes provided, zipping it up along the top of the dog’s back. The zip is heavy duty and easy to do up, and a neoprene and Velcro flap is provided to seal the whole thing off. It would be virtually impossible for the zip to become loose or undone with a Velcro flap to undo.

Specifications:

• Fabric: 5mm Neoprene
• Colour: Forest Camo
• Carry handle & Leash Eyes along the back

Heavy-duty construction, with bar tacked zip and Velcro and seams. This vest is made to endure the toughest conditions.

Size Chart:

Small: 43cm (16.9") neck - 56cm (22") chest

Medium: 45cm (17.7") neck- 62cm (24.4") chest

Large: 49cm (19") neck- 67cm (26") chest

X Large: 52cm (20.5") neck- 72cm (28") chest

2XL: 55cm (21.6") neck - 76cm (30") chest

3XL: 58cm (22.8") neck - 81cm (32") chest

What is in the Combo?

• 1x OO 50Cal Ammunition Tin
• 1x OO 30Cal V2 Ammunition Tin
• 1x OO Locking Hardware Kit for Ammo Boxes

The perfect companion for the storage of any Shotgun, handgun or rifle ammunition and much more. Keep your stuff safe with this combo deal for a 30cal ammo tin and 50cal ammo tin that are both lockable and air tight. The lids have a rubber seal allowing for an airtight inside keeping anything inside dry and safe.

The 30Cal Ammo Tin can fit into the 50Cal Ammo Tin as long as the "Locking Hardware" is removed from the 30Cal when placed inside 

Features:

• Waterproof and secure
• Both ammunition tins are lockable
• Lid clamps on tightly.
• Great for tools, ammo, heavy items or valuables. 
• Items inside remain safe and dry even when tin is buried.

50Cal Dimensions

• Length: 320 mm
• Height: 195 mm
• Width: 155 mm
• Depth: 182 mm
• Weight: 2.7 Kgs

V2 30Cal Dimensions

• Length: 295 mm
• Height: 177 mm
• Width: 97 mm
• Depth: 169 mm
• Weight: 1.7 Kgs

Perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. Stackable with easy-grip, scuff-resistant textured surface.

Dimensions;

• Length 12cm
• Width 12cm
• Height 3.5cm

Suitable for 9mm, .380ACP ammunition

​​​​​Ammunition used for illustrative purposes and is not included

Outdoor Outfitters Locking Hardware Kit For Ammo Boxes - Make any ammo box lockable 

What's included: 

• 1/2" Solid Stainless Steel Stud
• Large Washer
• Small Washer
• Rubber Washer
• Grade 8 Nylon Locknut
• Max shackle diameter: 5.5 mm 

PLEASE NOTE: A power drill and 8mm bit may be required for installation on some Ammunition Tins without pre-drilled holes

Instructions: 

1. Close lid. Find centre of the latch hole (or slot) and mark the tin at that point. Be as accurate as possible. 
2. (TIP: on .50cal tins with a small latch hole, close the lid and use a 12mm or 1/2" drill bit to lightly mark the centre (Do not drill through).) 
3. Drill an 8mm hole at the centre mark. Drilling a small pilot hole first may make this easier. 
4. Insert the threaded part of the locker stud through the hole from outside to inside. 
5. On the inside of the tin put the neoprene washer over the threads, followed by the small washer, then the nylon lock nut. Snug it tight with a wrench. Do not hold the stud with your fingers as it may have sharp edges. No thread locking compound is required but you may use some if you desire. 
6. With a 'big hole' or slotted lid, slip the supplied large washer over padlock stud before installing lock 
7. 6. For tins with 'small hole' latches, some filing or dremeling of the latch hole may be required to allow it to slip over the padlock stud. The closer to centre your initial hole is drilled, the better it will fit.

Brand New 50 calibre lockable ammo tin with hasp installed. Commonly referred to as the 50 calibre tin but used for grenades, 556 MM Blanks etc.

Features:

• Holds over 100x 50cal cartridges
• Waterproof and secure.
• Lid clamps on tightly.
• Great for tools, ammo and other heavy items. 
• Items inside remain safe and dry even when tin is buried.
• Hasp installed

Dimensions:

• Length: 32cm
• Height: 21.5cm
• Depth: 17cm

Carries 50 rounds of .243 / .308 ammunition. Stackable with easy-grip, scuff-resistant textured surface.

Suitable for; 220 Swift, 300 Sav., 338 RCM, 225 / 243/ 307 / 308 Win., 338 Fed., 25 / 32 / 6mm Rem., 28-30 Sevens, 30 Rem. AR, 360 NitroExpress 21/4”, 5.6 x 52 Rimmed, 6.5 Creedmoor, 6.5x50 Jap Arisaka, 6mm-284 Win., 7.35 Carcano, 7.5 x 54 French MAS, 7.65 x 53 Mauser, 7mmTCU, 7mm-08Rem

Dimensions:

• Length 15.5cm
• Width 8cm
• Height 8cm

Carries 50 rounds of .270 / .25-06 / .30-06 ammunition, perfect for reloaders. Stackable with easy-grip, scuff-resistant textured surface.

Suitable for: RL-50- 224Clark, 240 Wby.Mag., 257 Roberts, 270 Win., 25-06 / 280 Rem., 30

Gibbs, 30-06 Spr., 318Westley Richards, 338-06 A-Square, 35 Whelen, 375 Rimless 2 1/4 , 6.5Carcano, 6.5x257 Roberts, 6.5-06 A-Square, 6.5x54mm Mann-Schone, 6.5x 55 Swedish, 7x 64 Brenneke, 7x72 Rimmed, 7x57 / 9.3x57mm MAUSER, 8x57J, 7.7 Jap, 7.7x58 Jap., 8mm-06, 9.3x74,

Dimensions:

• Length 35cm
• Width 20cm
• Height 34cm

Stackable ammo box with easy-grip, scuff-resistant textured surface. Perfect for reloaders.

Dimensions:

Length 12cm

Width 12cm

Height 4.5cm

Holds 100 rounds of - .38 Spec, .357 magnum, .38 auto Colt, .32 H&R Mag., .32 WCF, .30 Mauser, .327 Fed. Mag., .35 Win S.L., .38 S&W, .38 Super Colt, 5.7x28 FN, 7.62x25 Tokarev, 9x23mm Win.

Ammunition used for illustrative purposes and is not included

The new Outdoor Outfitters Rechargeable Mini Dehumidifier is a must have to keep your guns in good nick when storing in your safe.

The Rechargeable Mini Dehumidifier is ideal for use in all enclosed spaces, draws, wardrobes, and kitchen cupboards, anywhere you have a problem with moisture or have expensive items to protect from damp air. Connecting the power led to the dehumidifier and leave recharging for 10-15 hours or until the crystals, seen through the crystal viewing window turn blue. Remove the plug from the unit and place where it is to be used. When the crystals turn pink, the unit will need to be recharged again. Use the supplied hook to hang over clothes rail if desired.

Safety Instructions:
Keep away from children it is not a toy.
To protect from electric shock do not immerse in water or any other liquid.
Unplug from socket when not recharging.
Do not operate if any part of the unit, cord or plug is damaged.
There are no user serviceable parts, return to your supplier for repair/replacement if the unit develops fault.
Do not cover either whilst recharging or in use.

Specifications:
Voltage: 100-240V
Power: 12W
Current: 0.096A

Dimensions:
Height: 120mm
Width: 150mm
Depth: 30mm

ATV gun rack mounts

Gun rack for use on your 4 wheeler / motorbike. (These will fit the front and rear racks on four wheelers)

Specifications:

• Fits most models, Honda, Kawasaki, Suzuki, Yamaha, ETC.
• Easy to fit, multi-fit clamp sytem. (no holes to drill)
• Also carrys shovels, tools, Back pack and anything else that will fit in there.
• Fork Dimensions: 12cm wide at top and 18cm high

Outdoor Outfitters Game Hoist & Grambrel Takedown Kit

• Easy one person setup and operation
• Durable all metal construction
• Easily hoist game up to 200 kilo
• Portable and lightweight carry
• Plenty of rope included
• Ideal for small deer, chamois, tahr, goat, sheep, & pigs

This kit is designed for easy dressing of game in the field. Operating on a 4:1 mechanical pulley system this strong and sturdy takedown style game hoist is designed to make your life easier when hanging, skinning and dressing your game.
The stainless steel gambrel and pulley system is designed to take up to 200kg.

The special part of this design is that the parts can easily and quickly break down to fit into your pack so you can take it with you for every hunting trip instead of leaving it at home.

(350133)

Gear up for the hunt with these game preparation knives - everything you need to prepare game for packing out of the bush.

16cm Skinning Knife
Ideal for larger game like deer and goats, this skinning knife is a must-have accessory for the keen hunter.

Features:
• 16cm stainless steel blade
• Tough, non-slip rubber over-molded handle
• Deeply curved blade for a longer cutting edge.

13.5cm Boning Knife
With its pointed tip and narrow, curved blade, this boning knife is perfect for working around joints and bones.

Features:
• 13.5cm stainless steel blade
• Tough, non-slip rubber over-molded handle
• Pointed tip and narrow, curved blade ideal for working around bones and joints.

Also sold separately, the Outdoor Outfitters Skinning Knife and Boning Knife.