Axes

This superb tomahawk features a factory-honed cutting edge. It has two sticking points on its cutting edge for throwing and throws extremely well. The Riflemans Hawk has a traditional American hammer-head style butt for hammering stakes.

Rifleman's Hawk

Specifications:

• Overall Length: 48.3cm (19")
• Hawk Length: 20.6cm (8 1/8")
• Weight: 907g (32oz) (approx.)
• Primary Edge: 8.9cm (3 1/2")
• American Hickory Handle

Cold Steel has modified their Axe Gang Hatchet, that you all know and love, to meet regulations for competition axe throwing in your favorite league. Now you can customize your competition throwing hatchet with your personal logos and bring your strongest game to the tournament!

This Cold Steel Competition Throwing Axe meets most axe throwing association requirements for tournament play.

Specifications:

• Head Weight: 21 oz
• Total Weight: 30 oz
• Blade Length: 4"
• Handle: American Hickory
• Steel/Material: Drop forged 1055 carbon
• Overall Length: 16"
• Additional Feature: Meets most axe throwing association requirements for tournament play

Broken handles are not covered under warranty

Suitable for re-enactors from any period stretching from the French and Indian War clear up to the final settling of the West in the late 1800's.

The authentic, good looking Frontier Hawk is one tough customer you're sure to appreciate.

This light weight Hawk is a joy to use too as it reduces wrist, elbow, and shoulder strain without sacrificing anything in chopping power or ease of handling.

The merits of its light weight are revealed in combat too because the Frontier Hawk can be used at light speed from any angle and immediately recovered!

Specifications:

• Overall Length: 22"
• Hawk Length: 6"
• Primary Edge: 3 1/4"
• Steel: Drop Forged 1055 Carbon
• Weight: 22.4 oz (approx.)
• Handle: American Hickory

For years, Cold Steel has tried to bring to market one of the devastating Chinese styled hatchets used with such awesome effect in countless Kung Fu movies. The Cold Steel version, the Axe Gang Hatchet, is an authentically formidable weapon, not just a prop for the cameras.

It features a drop-forged head, with a differential heat treatment (hard edge-soft body), and a straight, four inch cutting edge (with sharp corners). In addition to that it has a straight grain American Hickory handle with the Kanji characters that mean "Axe Gang".

Specifications:

• Overall Length: 20 1/4"
• Hawk Length: 5"
• Primary Edge: 4"
• Steel: Drop Forged 1055 Carbon
• Weight: 35.5 oz
• Handle: American Hickory

A more compact and easy to carry version of the timeless Hudson Bay Camp Axe, the Camp Hatchet is perfectly packable. Coming in at just over a foot in length and under 1.25 pounds, the Camp Hatchet is still a capable chopping tool for light limbing, splitting kindling, and sharpening and hammering tent stakes. At camp or on the trail the Camp Hatchet is a versatile tool with an innovative head design with secure bolt clamp attachment and field expedient handle replacement.

Head: The near inch thick head is made from durable 1055 carbon steel with a thin profile for fast, efficient chopping and a deep bite. The handle runs through the eye in the traditional fashion while the innovative bolt clamp pole delivers a very secure fit and fast replacement with the bolts being easily loosened with a single Allen wrench. The pole can also be used for hammering wood or plastic stakes or wedges for splitting larger pieces than the hatchet can handle.

Handle: Made from genuine straight grain hickory, the handle is relatively straight with a generous shoulder for a comfortable close grip for fine work while being fast in the hand chopping. The knob is angled for optimal leverage and control. Comes with a simple, rubber edge cover.

1055 High Carbon Steel: Simple, relatively low-carbon steel used in large, heavy-duty knives, throwing knives or chopping tools such as axes when toughness is the highest priority.

Specifications:

• Weight: 21.3oz
• Blade Thickness: Varies from edge to poll
• Blade Length: 3-1/4"
• Blade Steel: 1055 Carbon
• Handle Length/Material: 12-1/4" American Hickory
• Overall Length: 12-1/4""
• Additional Features: Removable head with an Allen wrench
• Steel Family: High Carbon Steels
• Style: American

The influence of the Viking’s famous weaponry far out-lasted the reign of the Vikings themselves. Their axes in particular, have influenced many designs that can be seen to this very day. Our Norse Hawk has a curved cutting edge to facilitate deep, slashing cuts and terminates in two sharp points. The top point was used to execute direct chops or, with a thrusting motion. The Norse Hawk remains one of our most popular Tomahawks. Both with renactors and with sport throwers, who admire its balance, effectiveness and effortless sticking power!

Specifications

• WEIGHT: 25.3 oz.
• THICKNESS: No
• HEAD: No
• HAMMER FACE: No
• PRIMARY EDGE: 4”
• HAWK LENGTH: 5 1/2”
• HEIGHT: No
• BLADE LENGTH: No
• HANDLE: American Hickory
• STEEL/MATERIAL: Drop Forged 1055 Carbon
• OVERALL: 22"
• ADDITIONAL FEATURE: Separate Cor-Ex™ Sheath Available (#SC90N)

Cold Steel Replacement Professional Throwing Axe Handle

Replacement hickory handle for CS-90AXA Throwing Axe. Approximately 16" long. 

The Trail Boss is light and compact enough to carry all day in your hand or strapped to your pack, yet heavy and tough enough for chores that would make a hatchet or tomahawk scream for mercy.

Featuring a European style head with a 4" blade and a 4 1/2” cutting edge, it takes a big bite with every swing. Plus, it features a very stout straight-grained Hickory handle.

Extensively field-tested by Lynn C. Thompson on a month long hunting trip in the outback of Australia, the Trail Boss was really put to the test. He used it to chop kindling, clear roads and trails, to build blinds and even to chop down a fair sized Gidgee Tree (one of the hardest woods found down under).

Specifications:

• Overall Length: 23"
• Hawk Length: 6 1/2"
• Primary Edge: 4 1/2"
• Steel: Drop Forged 1055 Carbon
• Weight: 2 Lbs 9.5 oz

Modelled after an early frontier pattern, our Trail Hawk can do it all. It's an excellent chopper and has a functional hammer poll with a hardened face so you can drive nails, hammer in stakes, and smash or crush just about anything.

Best of all it's extremely lightweight and compact so it's a cinch to tuck it under your belt or lash it to a pack or shooting bag.

Specifications:

• Overall Length: 22"
• Hawk Length: 6 1/2"
• Primary Edge: 2 1/4"
• Steel: Drop Forged 1055 Carbon
• Weight: 23.6 oz (approx.)
• Handle: American Hickory

Designed specifically for the seasoned axe thrower, the Cold Steel® Competition Throwing Hatchet features a hardened 1055 carbon steel head with a 4" blade, meeting axe throwing tournament requirements. The 16" American hickory handle offers exceptional balance during target practice sessions or serious competition. The head weight is 21oz and the overall weight is 31oz.

For those wanting the convenience of a quick-change handle our patent pending locking mechanism allows you to to change a worn or damaged handle by loosening two bolts, slipping out the worn handle and exchanging it for a new one. Now you can change your handle and be throwing again in under 2 minutes.

Broken handles are not covered under warranty

Specifications:

• Weight: 31.5oz
• Blade Steel: 1055 Carbon
• Handle Length/Material: 16in American Hickory
• Overall Length: 16in
• Steel Family: High Carbon Steels

A battle cry in axe form. Get a glance of the Berserker™ /bur-zur-kr/ Viking-style axe and you know trouble’s coming; if you’re an unsplit round, that is. The long cutting edge of the bearded axe blade is a powerful companion for big-swing jobs, fine slicing, and everything in between.

For designer Ryan Johnson of RMJ Tactical, the well of creative inspiration is bottomless. The proof is in this powerfully reminiscent Viking-style axe that features distinctive RMJ design touches. The utilitarian bearded edge is built for taking a big bite out of a sapling, but choke up on the Tennessee hickory handle and the carbon steel blade readily slices a thick tomato for your cast iron creation.

A traditional Viking axe makes for an anything-but-typical camping companion.

Features:

• Forged Tough: 1055 carbon steel provides durability and edge retention
• Enhanced Protection: Manganese Phosphate coating improves corrosion resistance
• Durable: Tennessee Hickory is a dense material that withstands hard use
• More Than Chop: Beard on axe head tackles many useful cutting tasks

Specifications:

• Blade Length: 4.65" (118.06 mm)
• Blade Edge: Axe w/Hammer
• Blade Steel: 1055 Carbon Steel
• Blade Finish: Manganese Phosphate Coating
• Blade Thickness: 1.57" (39.95 mm)
• Weight: 2.07 lb (0.94 kg)
• Handle:Tennessee Hickory
• Style: Axe

Looking for a sheath for your CRKT Berserker axe? Here’s a proper leather one. A bare axe is like a knife without a sheath. Easily blunted and cuts wrong stuff at the wrong time. Get one of these and protect your axe from the hostile environment and the peaceful environment from your hostile axe.

This is a thick and sturdy vegetable-tanned full-grain leather as it should be. The traditional tanning method produces durable stuff and it is more environmentally friendly than nowadays more common chrome tanning. Leather is properly oiled to prevent it from becoming hard and brittle. The seams are lock-stitched with strong and thick Nylon thread. Made in Oregon, USA.

This sheath is only meant for protecting the blade of the CRKT Berserker axe. Because it is designed to caress the unique figure of that particular axe head, it most likely loathes your other axes. If you try to force it on one of those modern plastic thingies, it will cut its belly open in shame and possibly tries to take your fingers with it. However, it will slide smoothly on Berserker and attaches securely with a snap fastener.

Features and Specifications:

• Well Built: Made in the USA
• High Quality: Durable full grained leather sheath
• Expert Crafted: Featuring hand oiled finish for durability
• Leather

Are you a brute and your untamed chopping power broke your CRKT® Berserker™ handle? No problem. We have the replacement handle for your CRKT® T-hawk right here. This Tennessee hickory handle is the replacement handle for the Beserker™, Woods Chogan™ T-Hawk, Woods Nobo™ T-Hawk and the Woods Kangee™ T-hawk. It's made in the USA, twice burned and buffed to add grip when you're in the backcountry.

To replace the handle, remove the old handle by carefully placing the butt of the old handle on the ground and tapping the head of the T-Hawk with a mallet until it slides down. To put the new handle on, slide the head onto the handle from the tapered end until it is seated on the thicker end of the handle. Next, hold the handle of the T-Hawk with the head down and hit the ground or a hard surface sharply several times to seat the head onto the handle. Changes in humidity may cause the head to become loose so be sure to check before use.

Specifications:
• Weight: 9.60 oz. (272.16 g)
• Handle: Tennessee Hickory
• Style: Accessory

Half hatchet, half axe. Fully built to withstand all tasks. Designed by Ryan Johnson of RMJ Tactical, the Chogan™ Hatchet is based on a classic rifelman’s tomahawk hatchet from 1804. Made from a solid chunk of 1055 carbon steel that is hot forged into a rock-solid head, this multipurpose tool splits the work of setting up your campsite in half. Equipped with a tough, yet lightweight glass-reinforced nylon handle made to withstand humidity, this hatchet axe combo chops up kindling to keep your fire roaring, while hammering stakes deep into the ground. Both practical and tactical, you’ll never feel more confident with this in your adventure bag.

Features:

• Forged Tough: 1055 carbon steel provides durability and edge retention
• Enhanced Protection: Manganese Phosphate coating improves corrosion resistance
• Multi-Purpose Utility: Easily split wood or hammer tent stakes
• Strong and Lightweight: Glass-reinforced nylon handle is durable and lightweight
• Accessory Options: Lanyard hole for additional retention

Specifications:

• Blade Length: 3.16" (80.29 mm)
• Blade Edge: Plain
• Blade Steel: 1055 Carbon Steel
• Blade Finish: Manganese Phosphate Coating
• Blade Thickness: 0.91" (23.06 mm)
• Overall Length: 13.19" (334.98 mm)
• Closed Length: 13.19" (334.98 mm)
• Weight: 1.48 lb (0.67 kg)
• Handle: Glass Reinforced Nylon
• Style: Hatchet

Norse design with a soul that’s all American. Why meddle with an axe shape that has been tried and true for over a thousand years? That’s the logic designer and veteran Elmer Roush brings to the Freyr™ tactical axe. The deep beard echoes Viking style. But its balance and pure burliness boosts it into a contemporary league all its own. Shield and Viking battle cry not included.

Elmer Roush of Brasstown, North Carolina has one foot definitively in the past. When it comes to designing axes, that is. Though the Freyr’s™ deep beard might not be put to use drawing back an enemy’s shield as it would have in Viking-patrolled seas of lore, the balance it adds elevates this axe to a modern workhorse. Named after the Norse god of prosperity, its Viking soul stands up to its classic appearance.

The blade itself is hot forged of carbon steel and receives a passivation treatment for ultimate corrosion resistance. It’s met with a handle carved of Tennessee hickory and is precisely crafted for durability and ease of use.

If it’s true that history repeats itself, then this utilitarian axe is definitive proof.

SPECIFICATIONS
Blade Length: 4.528" (115.01 mm)
Blade Edge: Axe
Blade Steel: 1055 Carbon Steel
Blade Finish: Magnesium Phosphate Coating
Blade Thickness: 1.185" (30.1 mm)
Overall Length: 16" (406.4 mm)
Weight: 1.79 lb (0.81 kg)
Handle: Tennessee Hickory
Style: Axe

Are you a brute and your untamed chopping power broke your CRKT® Woods T-Hawk handle? No problem. We have the replacement handle for your CRKT® T-hawk right here. This Tennessee hickory handle is the replacement handle for the Woods Chogan T-Hawk and the Woods Kangee T-hawk. It's made in the USA and sealed with a lacquer coat that adds durability when you're in the backcountry.

To replace the handle, remove the old handle by carefully placing the butt of the old handle on the ground and tapping the head of the T-hawk with a mallet until it slides down. To put the new handle on, slide the head onto the handle from the tapered end until it is seated on the thicker end of the handle. Next, hold the handle of the T-Hawk with the head down and hit the ground or a hard surface sharply several times to seat the head onto the handle. Changes in humidity may cause the head to become loose so be sure to check before use.

SPECIFICATIONS
Overall Length: 19" (482.6 mm)
Weight: 9.6 oz. (272.16g)
Handle: Hickory
Style: Accessory

This CRKT two-handed camp axe with a hickory handle, hot forged blade, and spike end will make your life easier when you’re off the grid.

Ryan Johnson of RMJ Tactical in Chattanooga, TN designed the CRKT Woods Kangee™ T-hawk. A specialist in applying modern engineering to centuries old tool and weapon concepts, he is upping the ante once again with a new outdoor line of tomahawks that swing as big as the open wilderness where they’re found.

The design for this CRKT T-Hawk evolved from the popular and original tactical tomahawk series. But it’s built for battle with a few old Doug Firs. The CRKT Woods Kangee™ is made from a solid chunk of 1055 carbon steel that is hot forged into a rock-solid head and features a hammer finish. With primary and secondary edge bevels that are flat ground, it cuts through timber like a beaver. A spike on the opposite end splits ultra-tough wood knots like a boss.

The thick wood handle is made in the USA from Tennessee hickory. It's comfortable in hand and sealed with a lacquer coat that adds durability whenever you're in the backcountry—in other words, all the time.

Grab hold of the CRKT Woods Kangee™ T-Hawk and split some wood—like a cord’s worth.

Specifications:
• Blade Length: 4.21" (106.93 mm)
• Blade Edge: Axe w/Spike
• Blade Steel: 1055 Carbon Steel
• Blade Finish: Clear Lacquer
• Blade Thickness: 0.4" (10.16 mm)
• Overall Length: 19.13" (485.9 mm)
• Weight: 1.98 lb (0.9 kg)
• Handle: Tennessee Hickory
• Style: Tomahawk

Build a Nice Log Cabin Fire. Heck, Build a Nice Log Cabin Home.

This traditionally-modeled two-handed camp axe with a hickory handle and hot forged blade, will make your life easier when you’re off the grid.

Ryan Johnson of RMJ Tactical in Chattanooga, TN designed the Nobo™ T-hawk. He’s a specialist in applying modern engineering to centuries old tool and weapon concepts, and upping the ante once again with a new outdoor line of tomahawks that swing as big as the open wilderness in which they’re found.

The design for this T-Hawk is modeled after the classic trade tomahawks common during the 18th century. The Nobo™ is made from a solid chunk of 1055 carbon steel that is hot forged into a rock-solid head and features a hammer finish. With primary and secondary edge bevels that are flat ground, it cuts through timber like a beaver.

The thick wood handle is made in the USA from Tennessee hickory. It's comfortable in hand and sealed with a lacquer coat that adds durability whenever you're in the back country—in other words, all the time.

Grab hold of the Nobo™ T-Hawk and split some wood—like a cord’s worth.

SPECIFICATIONS

Blade Length: 3.471" (88.16 mm)

Blade Edge: Axe

Blade Steel: 1055 Carbon Steel

Blade Finish: Clear Lacquer

Blade Thickness: 0.460" (11.68 mm)

Overall Length: 19.13" (485.9 mm)

Weight: 1.59 lb (0.72 kg)

Handle: Tennessee Hickory

Style: Tomahawk

Build a Nice Log Cabin Fire. Heck, Build a Nice Log Cabin Home.

This CRKT two-handed camp axe with a hickory handle, hot forged blade, and hammerhead will make your life easier when you’re off the grid.

Ryan Johnson of RMJ Tactical in Chattanooga, TN designed The Woods Chogan™ T-Hawk. A specialist in applying modern engineering to centuries old tool and weapon concepts, he is upping the ante once again with a new outdoor line of tomahawks that swing as big as the open wilderness where they’re found.

The design for this CRKT T-Hawk evolved from the popular and original tactical tomahawk series. But it’s built for battle with a few old Doug Firs. The CRKT Woods Chogan™ is made from a solid chunk of 1055 carbon steel that is hot forged into a rock-solid head that features a hammer finish. With primary and secondary edge bevels that are flat ground, it cuts through timber like a beaver. A hammerhead is useful for pounding in nails and stakes for the tent you’ll put by your roaring fire.

The thick wood handle is made in the USA from Tennessee hickory. It's comfortable in hand and sealed with a lacquer coat that adds durability whenever you're in the backcountry—in other words, all the time.

Grab hold of the CRKT Woods Chogan™ T-Hawk and split some wood—like a cord’s worth.

Specifications:
• Blade Length: 3.500" (88.9 mm)
• Blade Edge: Axe w/Hammer
• Blade Steel: 1055 Carbon Steel
• Blade Finish: Clear Lacquer
• Blade Thickness: 0.52" (13.21 mm)
• Overall Length: 19.13" (485.9 mm)
• Weight: 1.99 lb (0.9 kg)
• Handle: Tennessee Hickory
• Style: Tomahawk

Hunting axe. Nieto axes have a style you will easily be able to distinguish from other knife and axe brands.

Designed by Miguel Nieto and manufactured in Albacete, Spain, these Hunting and Bushcraft axes use great materials, are well built, and are best of all affordable.

Specifications:

• Blade material  AN-58 steel
• Handle material  Mikarta
• Full length  27 cm
• Weight  450 gr
• Sheath Premium black leather

Are you a dedicated adventurer? Then the Walther Compact Axe should be basic equipment, whether you take it on survival trips or just use it in the garden. Its compact dimensions make it handy without sacrificing functionality. With teh hole for the index finger, the Compact Axe is perfectly for whittling, or even for skinning game. The axe is only 228 mm long, and its weight of 270 g is comfortably shifted towards the head. The axe head is made of 440C steel with a thickness of 5.7 mm. The ergonomic handle made of textured polymer provides a secure and firm grip. A lanyard hole on the knob can be used for attachment of a cord.

TECHNICAL DATA
Blade material 440C
Grip Material synthetic
Blade shape Normal blade
Blade Length 70 mm
Length 228 mm
Weight 280 g