All Products

Fun Target Rimfire Bullet Trap - rimfire target shooting at its best!

This is the perfect target gallery for practice shooting and plinking with your favourite rimfire rifle. Featuring a choice of four highly visible steel targets which automatically swing and reset after shooting them. No more walking down range to reset targets and more time behind the trigger having fun with friends and family. This is the ultimate solution to your target shooting!

Excellent size for close range and long range practice shooting. Measures 495mm wide, 200mm high and 215mm deep. Angled backing designed to deflect your shot into the catcher base.

As an added bonus, the Fun Target Rimfire Bullet Trap also comes with a clip which you can use to hold up paper targets if you wish to change it up a little bit!

Features:

• Made from strong steel
• Self-resetting bright orange targets
• Suitable for .22LR rimfire rifles up to 1200 fps
• Tough, weather resistant powder-coated steel
• Collects all your shots for easy clean up
• Includes a removable clip for holding paper targets

Precision Pro picatinny base for Browning X-Bolt rifles.

Specifications:

• One-piece 7075 T6 aluminum 
• Full cross slots
• Hard oxidization finish 
• 20 MOA Short Action
• Length: 179mm
• Includes allen key and screws

Precision Pro picatinny base for Browning X-Bolt rifles.

Specifications:

• One-piece 7075 T6 aluminum 
• Full cross slots
• Hard oxidization finish 
• 20 MOA Long Action
• Length: 179mm
• Includes allen key and screws

Precision Pro picatinny base for Tikka T3/T3x rifles. Available in 0 or 20 MOA. Featuring a built-in recoil lug for the most secure mount. Perfect for high recoil calibers such as 300 winchester magnum and 7mm remington magnum

What base do I choose, 0 MOA or 20 MOA?

Most hunters usually do not require anything more than a 0 MOA base so we suggest in theory to consider a 20 MOA base only if you intend on mainly shooting past 500 meters. 20 MOA rails are made for long range rifles and are slanted to give you more elevation to aide with your limited scope adjustments. 

Specifications:

• 0 MOA or 20 MOA
• Built-in recoil lug for secure mounting
• One-piece 7075 T6 aluminum 
• Length: 169mm
• Includes allen key and screws

Precision Pro picatinny base for Tikka T3/T3x rifles. Available in 0 or 20 MOA. Featuring a built-in recoil lug for the most secure mount. Perfect for high recoil calibers such as 300 winchester magnum and 7mm remington magnum

What base do I choose, 0 MOA or 20 MOA?

Most hunters usually do not require anything more than a 0 MOA base so we suggest in theory to consider a 20 MOA base only if you intend on mainly shooting past 500 meters. 20 MOA rails are made for long range rifles and are slanted to give you more elevation to aide with your limited scope adjustments. 

Specifications:

• 0 MOA or 20 MOA
• Built-in recoil lug for secure mounting
• One-piece 7075 T6 aluminum 
• Length: 169mm
• Includes allen key and screws

Multi-use Precision Pro picatinny base & mount for the Ruger 10/22 rifle. Allows scope or red dot optic mounting versatility to install onto this rail. Easy to install on any Ruger 10/22. 

Specifications:

• 11 Slot one-piece rail
• Length: 4.5"
• Made from 7075/T6 aluminium alloy
• Milspec coating
• Includes allen key and screws

Precision Pro 2 piece base for the Howa 1500 rifle. Fits all calibers short and long action. 

Specifications:

• Fits single crossbar weaver and picatinny screws
• 7075/T6 alloy composition
• 0 MOA
• Low profile
• Two-piece base
• Matte finish
• Includes mounting screws (torx key not included)

25in/lb of torque is recommended for installation.

Precision Pro picatinny base for the Howa 1500 mini action rifle. A 1 piece base is the best way to have a solid foundation for your scope or optic. As apposed to a conventional 2 piece base, a single base features less parts involved in connection to your rifle's receiver; this creates a strong platform for any optic, which is important for any rifle to be accurate. 

Fits 223 Howa mini, 7.62x39 Howa mini, 300 BLK Howa mini, 450 BM Howa mini.

Specifications:

• 7075/T6 alloy composition
• 0 MOA
• One-piece base
• Length: 130mm
• Matte finish
• Includes allen key and mounting screws

This is a first class, top-of-the-line trigger lock. Hardened alloy construction with double-sided rubber lining. Steel and Zinc body for maximum durability. Adjustable width - universal fit. Soft rubber pads protect gun finish.

 Ergonomic design facilitates rapid installation. Secure twist open/closed mechanism. Features 3 digit combination. Protect your airguns and firearms against unwanted use.

Features:

• Hardened ally construction
• Steel & Zinc body
• Double-sided rubber lining
• 3 digit combination
• Adjustable width
• Universal fit

2 Trigger locks deal - Buy 1 get 1 at 50% off!

How to Set Combination Code:

• Dial in your old combination code or 000 if setting for first time

• Press the button on the side with a pen or any fine tipped object.

• Dial in your new code while holding the side button in. Once new code is set release the side button then flick the side lever upwards to unlock. 

Outdoor Outfitters Extra High Rings 3/8"  1" 

Extra High: height which is great for mounting scopes with larger objectives. Suitable for up to 52mm objective on most scopes.

These are made of alloy and are perfect for mounting scopes on air rifles and rimfire rifles.
Double Allen key clamp and it includes all allen keys needed for mounting these rings.

Product Information:
Shop more Burris products Burris Zee Rings are high quality, all-steel rings for use with any Weaver-style base (sold separately).


Technical Information:
Material: Steel
Style: Weaver
Ring Height: .255" (measured from base of ring to bottom of scope tube)


Notes:
Mounting hardware included.

This nylon collar swaps easily from a black exterior for general use to blaze orange for upland game with a quick release of the buckle. Heavy-duty 1" polyester webbing. Durable, easy-release hardware.

They measure 25mm wide and will fit a dog with a 305m - 410m neck.

Product Information:
Shop more Burris products Burris Zee Rings are high quality, all-steel rings for use with any Weaver-style base (sold separately).

Technical Information:
Material: Steel
Style: Weaver
Ring Height: .450" (measured from base of ring to bottom of scope tube)

Notes:
Mounting hardware included.

Airsoft goggles

Features:

• High quality and durable safety goggles.
• Featuring steel mesh lenses giving you clear sight with no glare as theres no glass and no fog!
• The interior of the frame is also coated with a soft foam making them very comfortable!
• Easy to use adjustable strap.

Specifications:

• material: pvc/ steel mesh and foam
• colour: Olive green
• goggle size: approximately 17 x 5 x 1.5cm
• strap size: 19-37cm appoximately
• weight: 125g

Hone in on your archery skillset with this 420 mm square foam target block!

This is a great tool to have for those wanting to improve their hunting or target accuracy at home or at the range. Light and easy to carry around!

Features:
• XPE Self-Healing foam
• High Density target
• Has a target zone for Animal
• Two Sided Target
• Realistic practice target
• Built-in Carrying strap

Specifications:
• Material: XPE Self-Healing Foam
• Colour: Black & Green
• Dimensions: 420 x 420 x 210 mm
• Weight: 2 kgs

No more having to get up to reset your targets, or replace paper targets all the time with the Fun Target Rolling Rabbit Air Rifle Target! Aim and shoot at the pesky rabbit, then it will roll itself back up again - meaning less time resetting it yourself and more time shooting it! Plus this Rolling Rabbit Target has an additional spinning carrot target which you can also aim for, and will spin and rest itself once hit.

This metal target is also super simple to set up, with a quick and easy screw assembly and then it's ready to be placed in position, the target will be set in place - then you're ready to shoot!

Features:
• Suitable for .177 or .22 calibre air rifles
• Self-resetting steel target
• Rocking action and spinning targets for extra challenge
• Made of durable steel
• Tough, weather-resistant powder-coating
• Easy set-up

Dimensions:
• 36cm Height
• 16cm Width
• 5cm Average target size

FAB's uniquely designed T-POD-G2 Rotating Tactical Foregrip & Bipod transforms a foregrip into a fully functional Bipod by the push of a button.

Features:

• Transforms from a Foregrip in to a fully functioning Bipod by the push of a button
• Head features a unique Rotating and tilting mechanism
• Built in adjustable pressure switch mount
• Quick release picatinny mount
• Independent adjustable legs with 5 different length options
• Legs are made from 6061-t6 hard coated anodized aluminum
• Durable and lightweight fiberglass reinforced polymer construction
• User installed - no modification or gunsmith required

Compatibility:

• All firearms with an underside 1913 MIL-STD picatinny rail
• Requires a minimum of 6 slots / 6.5 cm rail

Specifications:

• Weight: 364g
• Height: 157mm
•  Length: 63mm

There is no better oil finish! TRU-OIL Gun Stock Finish is the professional’s choice for gunstock (or furniture) finishing for more than 30 years. Its unique blend of linseed and natural oils dries fast and will not cloud, yellow or crack with age and resists water damage.

TRU-OIL Gun Stock Finish penetrates deeply and forms a tough, clear, hard finish that protects and enhances the beauty of fine woods. For a hand rubbed, satin luster, simply buff with steel wool and rubbing compound or use Stock Sheen & Conditioner.

Excellent as a sealer for under butt plates, recoil pads and in inletted actions to prevent stock damage. Use the liquid for fast filling of the pores and the aerosol for the final finish.

90mL bottle.

What is in the Combo?

• 1x OO 50Cal Ammunition Tin
• 1x OO 30Cal V2 Ammunition Tin
• 1x OO Locking Hardware Kit for Ammo Boxes

The perfect companion for the storage of any Shotgun, handgun or rifle ammunition and much more. Keep your stuff safe with this combo deal for a 30cal ammo tin and 50cal ammo tin that are both lockable and air tight. The lids have a rubber seal allowing for an airtight inside keeping anything inside dry and safe.

The 30Cal Ammo Tin can fit into the 50Cal Ammo Tin as long as the "Locking Hardware" is removed from the 30Cal when placed inside 

Features:

• Waterproof and secure
• Both ammunition tins are lockable
• Lid clamps on tightly.
• Great for tools, ammo, heavy items or valuables. 
• Items inside remain safe and dry even when tin is buried.

50Cal Dimensions

• Length: 320 mm
• Height: 195 mm
• Width: 155 mm
• Depth: 182 mm
• Weight: 2.7 Kgs

V2 30Cal Dimensions

• Length: 295 mm
• Height: 177 mm
• Width: 97 mm
• Depth: 169 mm
• Weight: 1.7 Kgs

The FAB Defense SPIKE Precision Bipod was designed to deliver the best experience and comfort to any mission via its versatility and smart hybrid construction.

Specifications:
• Weight: 405 g
• Width: 96mm
• Height: 50mm
• Length: 206mm
• Width (open/deployed): 242mm
• Height (open/deployed): 180mm
• Length (open/deployed): 51mm

Regardless of the scenario, the Holographic Hybrid Sight II (HHS II), featuring an EXPS2-2 with a G33.STS magnifier, provides an amazing advantage when transitioning from close-quarters to long-range shooting. Instant transition is achieved through a quick Switch-To-Side (STS) mount that offers a simple, quick disengagement of the magnifier.

EOTECH’s unique reticle patterns are a critical to delivering fast target acquisition and MOA accuracy at any range. EOTECH reticles feature a 68 MOA ring surrounding a 1 MOA center dot allowing the shooter to quickly pick up and lock on a target. Eotech's two-dot reticle pattern can be easily distinguished with or without magnification and offers the benefit of an additional long-range, aiming dot. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel.

The standard ring found in most reticles equates to approximately 68" (5'8") at 100 yards.

The EXPS2™ HWS offers multiple brightness settings offering quick adjustability to accommodate any shooting situation.

Specifications

• L X W X H: 8.2" x 2.3" x 3.3" (208.3 x 58.4 x 83.8 mm)
• Weight 22.4oz (635g)
• Water Resistant 10ft. (3 m) depth
• Mount 1" Weaver or MIL-STD-1913 rail
• Windage & Elevation Adjustment 0.5 MOA per click
• Brightness 20 daylight settings
• Power Source 1 x CR123 battery
• Battery Life 1,000 continuous hours at nominal setting 12 at room temperature
• Operating Temperature -40°F to 140°F (-40°C to 60°C)
• Fixed Magnification 3X
• Eye Relief 2.2" (55.9 mm)
• Field-of-View w/ Magnifier 7.3°
• Sealing Fog resistant internal optics
• Country of Origin HWS: Made in USA - G33: Assembled in USA

Included in the box:

• HHS™ II (EXPS2-2 & G33.STS)
• Quick-Start Guide
• Warranty & Registration Card
• CR123 Battery
• Protective Case